Carpet tiles Tackifier

STYCCOBOND F41 is a solvent-free acrylic polymer emulsion adhesive. It is designed to provide a permanently tacky film which prevents ‘loose-lay’ carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques.

Key Benefits:
  • Excellent coverage
  • Permanently tacky when dry
  • suitable for all common carpet tiles

Colour: White

  • all substrates normally used in the building industry, on existing flooring and on raised floors.
  • Suitable on heated floors.

Floor Coverings:

  • Carpet tiles – (bitumen/felt, non-woven fabric, PVC and other polymer backings)

Coverage: 250m2
Packaging: 15L
Emicode: EC1 Plus – very low emission.
Waiting Time: Installation should be carried out once the adhesive has become transparent
Open Time: 30 mins – 12 Hours
Dry Time: Light foot traffic immediately after installation
Application: Using a brush or roller, apply the adhesive evenly to the subfloor,

Adhesive Calculator

Coverage may differ depending on the application method, substrate condition, and on-site factors.
The information provided below is intended solely as a guide.
For more detailed information, please consult the product datasheet.