Styccobond F58
Vinyl and Rubber Floorcovering Adhesive
STYCCOBOND F58 is a solvent free adhesive that can be used as a wet lay, semi-wet or pressure sensitive adhesive for securing PVC vinyl sheet and tile floorcoverings.
When used as a wet lay adhesive, STYCCOBOND F58 is suitable for rubber sheet and tile floorcoverings up to 4mm thick.
Key Benefits:
- Use as a wet lay, semi-wet or PS adhesive.
- Fast drying – install tiles from 10 minutes.
- Up to 90 minutes open time.
- Suitable with underfloor heating.
Colour: White
Substrates:
- Absorbent concrete, screeds & timber floors where the surface finish is smooth enough to permit the installation of PVC floorcoverings.
- STOPGAP epoxy resin waterproof surface membranes and other non-absorbent subfloors when used as a pressure sensitive adhesive.
- STYCCOBOND F58 is suitable for use over normal underfloor heating installations.
Floor Coverings:
- Homogeneous and heterogeneous PVC floor coverings.
- Luxury Vinyl Tiles.
- Rubber up to 4mm (wet-lay only)
Coverage:
- Up to 60m2 – PVC Floorcoverings
- Up to 45m2 – Rubber floorcoverings
Packaging: 15L
Emicode: EC1 Plus – very low emission.
Waiting Time: 5 minutes
Open Time: 90 minutes
Application:
- Trowel V1 – PVC Floorcoverings
- Trowel V2 – Rubber Floorcoverings
Adhesive Calculator
Coverage may differ depending on the application method, substrate condition, and on-site factors.
The information provided below is intended solely as a guide.
For more detailed information, please consult the product datasheet.